Siding is a critical component of a home. Not only is it the first thing you notice from the curb, it is a home’s first line of defense against the outdoor environment, including heat, cold, wind, noise, wildlife, weather, and more. For these reasons, routine maintenance is a significant need that should never be ignored by a home owner. If you want your siding to last as it’s designed to last, you need to do your part by providing the attention it needs. If you fail to do so, you will likely have to pay for continuous siding repairs, and in serious cases, require full siding replacement.
To avoid premature siding repairs and replacements, simply learn what your particular type of siding requires in terms of maintenance and upkeep. Since vinyl, wood, and metal siding are so popular, let us start there! Continue reading for a general overview of wood, vinyl, and metal siding maintenance.
Metal Siding Maintenance
For metal siding, it is important to use a quality sealant to avoid rust formation. If rust does occur in small areas, you can scrape it off and recover the affected area with a fitting sealant. Be sure you use the proper tools and materials for this type of upkeep in order to avoid damaging your siding.
For painted metal siding, it is common for paint to peel off after some time. This is especially common when areas of a home are in direct heat or sunlight for most of the day. If this happens, scraping off the peeling paint and repainting the affected area will prevent further chipping and peeling.
Metal siding can be cleaned with a light setting on a pressure washer. This should be done at least one time per year, and without the use of harsh chemical cleaners. A simple 3 to 1 ratio of clean water and mild laundry detergent soap will clean metal siding and keep mold and mildew at bay. If you notice mold or mildew, use the opposite ratio (1:3) with household bleach and water to spot treat the areas.
Wood Siding Maintenance
Wood siding is a little more high maintenance than other siding materials. It requires a routine treatment every 4 to 6 years to prevent weathering and weather damage. Since wood is a sensitive material, it is not recommended to use a pressure washer for cleaning unless it is performed by trained professionals.
Wood siding should be cleaned once a year to prevent discoloration, mold, mildew, wood rot, and pest infestations. You can do this on your own with a soft bristled brush, warm water, and mild dish soap. But if your home is large or has multiple stories, you will need professional service.
If you notice holes or cracks forming in the siding, you will need to have them repaired as soon as possible before they get worse. Fortunately, they are fairly easy repairs to perform. Just be sure to hire a skilled Indianapolis Siding Repair Company for service you can trust.
Vinyl Siding Maintenance
Vinyl siding is designed to be a “set it and forget it” siding option. Being so low maintenance, it is easy to care for and clean. It is important to clean your vinyl siding at least once per year using a soft sponge, a hard bristled brush, and some soapy water. Simply work from the top to bottom in 20 foot sections, and then rinse clean with a hose or pressure washer set on low. This will keep your vinyl siding looking fresh and clean for years.
In addition to cleaning your vinyl siding on your own, it is strongly recommended to have it professionally power washed every year, either before or after the summer season. This effectively removes old or unwanted leaf debris, insect webs, nests, dust, pollen, bird droppings, and more.